|
| |
JP3.0 ribbon tweeter is a high-performance
component which is probably the best choice to building/upgrade your loudspeaker.
Features:
-
Super strong Neodymium magnet with high efficiency
-
Build-in impedance conversion transformer
-
Effective from 1,400Hz upwards due to the large diaphragm area and low
self-resonance.
- Extremely thin diaphragm (0.009mm Aluminum foil)
guarantees a high degree of signal fidelity and broad frequency response.
- Low
distortion factor, good power-handling capabilities, high linear impedance
and amplitude frequency response and the broad frequency response range.
- Flat
impedance from 1,000 to 40,000Hz
Specifikations
|
|
Ribbon material |
Aluminum |
|
Ribbon mass |
11mg |
|
Ribbon dimension |
8mmx66mmx0.009mm |
|
Ribbon area |
528 square micrometer |
|
Gap flux |
0.6 Tesla |
|
Gap height |
3mm |
|
Impedance |
7 ohm |
|
DCR |
0.02 ohm |
|
Sensitivity |
95dB/M/W |
|
Frequency response |
1,700~40,000Hz |
|
Resonance frequency |
220Hz |
|
Power handling |
14W Normal, 40W Max |
|
Recommended crossover frequency |
2,500Hz with –18dB |
|
